Wirepath WPS-700-DOM-A-WH Instalační manuál stáhnout pdf (Strana 6)

WPS-700-DOM-A Installation Manual

PACKAGE CONTENTS

(1) Camera

(1) AC/DC plug

(3) Screws

(3) Wall fasteners

(1) 3mm Allen Key

(1) Foam gasket

Manual

NOTE 1: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA.

The PS-12DC-1A is recommended.

NOTE 2 : A Silica Gel package is mounted inside the dome housing. This package

should remain inside the housing after installation.

INSTALLATION INSTRUCTIONS

1. Recommended cabling includes solid copper RG59 or RG6 for

video, 18AWG two-conductor for power, and a CAT5 for RS485

control of the OSD.

2. Open the camera by using

the provided 3mm Allen key

to remove the three screws

on the dome cover.

3. Prior to installation, it is recommended to pre-adjust the camera’s

3-axis bracket angle so the lens points in the desired direction. The

lensangleshouldnotexceed50˚offofthecenteraxis(seepage

27 for details). It is also recommended to connect the camera to a

display and pre-adjust the zoom and focus

(see step 6). If the RS485

function will be utilized,

congureandtestthe

settings prior to camera

placement. Taking

these steps will speed

installation time.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Žádné komentáře

Wirepath WPS-700-DOM-A-WH Instalační manuál Strana 6